Cross cuts are cuts the go against the woodgrain. Once you've properly measured and marked your piece of wood, guide the side of the handsaw blade with the knuckle of your thumb. Start the cut by pulling your hand saw up two or three times, then push the saw blade forward at about a 45 degree angle. It is preferable to begin your cuts on the side of the wood that will show less when the project is complete.
If you have torchiere fixtures with halogen lamps, consider replacing them with compact fluorescent torchieres. Compact fluorescent torchieres use 60% to 80% less energy and can produce more light (lumens) than the halogen torchieres.