To keep sanpaper discs from curling up, make a simple jig to keep them flat. Cut out two pieces of 1/4-in. plywood that are slightly larger than the discs. Drill a 1/4-in. hole through the center of each of the pieces. Insert a bolt through one piece, lay the discs on it, and follow up with the second piece. Fasten the stack with a 1/4-in. bolt and wingnut.
Like tile, most paint will differ slightly in each lot produced. If you plan to use the same color thoughout your house, it’s a good idea to purchase as much paint as you can at one time. This will avoid any deviations in the paint color and save you an extra trip to the store.