> Ask a Question > Fix It Forum > you can do this IF....
Login | Register

you can do this IF....

Posted by Moderator, Steve on February 9th, 2002 04:37 PM
In reply to Stripped Screw Head by Terry on February 9th, 2002 01:47 PM [Go to top of thread]

the head of the screw protrudes beyond the handle: Get a hax saw and carefully cut a straight long cut into the head. Make the cut as deep as you can. Then get a screw driver with the sloted head, and then make sure it fits deep into the groove. If not, make the groove wider or file the head of the driver where its at more of an angle.

Now, carefully apply alot of downward pressure on the head of the screw driver and at the same time turn. If you bounce up and out of the slot, you may waller the groove and cause more problems.

Let me know how this works.

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

  • followup by georgey  3/17/02 01:22 AM

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC