Now we need to figure out how to add some sort of a shim to make the S/O door work.
A shim of wood would not last, regretably, because that would be the easiest to make.
I would suggest that you place the door in the opening and then measure the distance or void in three places, the top, the middle the bottom. Now do the same for the other side.
Now, take this measurement to a lumber yard and have it cut on a table saw or contact a person that you know and have this cut.
I would have a piece of plastic stock cut for this shim. Plexi glass or some synthetic would do the job and as you stated, use 100% caulking for the holidays left.
I will solicit some other board members to assist us.
© 2016 Renovate Your World LLC