> Ask a Question > Fix It Forum > Weighing up your problem.
Login | Register

Weighing up your problem.

Posted by John 2000 on August 25th, 1999 03:55 PM
In reply to Sash Weights by Dennis Pepper on August 24th, 1999 05:43 PM [Go to top of thread]

Dennis Hi,
There is another trick which can be used for replacing
your weights.
You can use scafloding tubes thats about 2" wide, which
would be about the same as your weights that are missing.
The weights that you have, are shall we say 2' x 9" +/-
cut the tube the same lenght, drill a hole on both sides
about 2" from one end, so you can push a bolt through
tie some baleing wire ( wire you use for fences ) loop it
round the bolt inside the tube.( center of the bolt) block
the other end and fill with concrete to the top.
The bolt will help to stop the concrete from sliding out when
its dry.
It may do the trick, depends on how heavy the old weight where.
John 2000

Was this post helpful? Yes: or No:

Topic History:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC