> Ask a Question > Fix It Forum > Water Boss Overfill
Login | Register

Water Boss Overfill

Posted by Tom on January 16th, 2002 01:26 AM
In reply to Water Softner filling up with water by Brian Hoeffling on December 3rd, 2001 11:05 PM [Go to top of thread]

I too had this problem and after replacing the valve body as well as the brine syphon valve I found the plug in the bottom of the big black cylinder was slowly leaking. There are two O rings on it that may be the cause. Try tightening the plug gently (as you can easily cause the O rings to bind and tear). All this requires removal of the clyinder. The easiest way to tell if the leak is fixed is to place the cylinder on a piece of cardboard while connected to the plumbing with the pressure on. Any leaks will soon show. Good luck

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC