I like the idea of a temporary setup. I considered this, but was to nervous. The setup will have to be used in an door left adjar, or through a window in the door. This still should be the best way. If I remove a lite from the door, I will just mount the filter cap on plexiglass or a board, mounted in the opening. Then connect it when drying, or plug it up. If not, I will just mount it on a board in a fashion that will allow it to pass through the open door, and rest on top of the door. Anybody have any further suggestions? I have full permission to do what I want to the building. It is in pretty delapidated condition anyway.