> Ask a Question > Fix It Forum > Step in to the light , and I'll tell you how it's done..?
Login | Register

Step in to the light , and I'll tell you how it's done..?

Posted by John 2000 on November 13th, 2000 03:06 PM
In reply to Double Hung Windo pulley replacement by Bob L on November 13th, 2000 02:28 PM [Go to top of thread]

Hi Bob, I dont think it's sealed completly, there
must be away to get at the weights.
Normaly, you can only get to the weight by taking
out the windows, because the little door where the
weight live is on the side where the windows run up
and down, and you cant normaly see it,
so, first. have a look to where the windows slid up
and down the door should be about 8" to 10" from the
top of the sill.
you may have to take out the parting bead, ( thats the
lath between the two windows that runs from top to bottom)
if you cant get to it then take out the stop bead, ( thats
the nice molded lath 3/4'X 3/4" that is nailed to the frame
that goes all around the window,( and it holds the bottom
window in place, just take one side out and have a look there
there has tobe a way in, then come back to me on this.
then I can "try" and help you further....John 2000

Was this post helpful? Yes: or No:

Topic History:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC