> Ask a Question > Fix It Forum > Sagging Door
Login | Register

Sagging Door

Posted by Henry in MI on January 8th, 2000 07:16 PM
In reply to Entry door by Wick on January 8th, 2000 05:11 PM [Go to top of thread]

Wick is right but there is one thing that you should also check before you plane. It sounds like you might have the screws pulling out of probably the jamb but possibly the door. Check to see if there is any looseness at all where the hinges fit into their mortises. It' amazing how much the door can sag from only a few thousanths of an inch of looseness. If this is the problem, take one screw out and to a good home center. Tell them that you want 3 screws the same number/diameter as the sample and as long as they have. Then replace one screw in each hinge with the longer screw.

Good luck
Henry in MI

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC