renovateyourworld.com > Ask a Question > Fix It Forum > roofs / parking lots / floors / sidings that supply hot water
Login | Register

roofs / parking lots / floors / sidings that supply hot water


Posted by martin scholler on March 18th, 2000 07:49 PM
In reply to Warm Floor Products by The Warm Floor Center on December 31st, 1997 11:15 AM [Go to top of thread]

Maximum potential building products needs development .


PARKING LOTS - DRIVEWAYS that supply free hot water !

In SOLAR TODAY on page 40 you have a write up - Interested in developing / producing and selling such a product line world wide ? Contact us for more information . Here is more :

MAX POTENTIAL BUILDING PRODUCTS !

Only when standard building products that supply hot water from solar energy can be made for very little will there be a upsurge in the use of solar energy and large size energy savings world wide .We have the product and the production technology

THERMOTILE - supplies free hot water and costs so little to produce !

The maximum potential building product allow for Roof tiles / Wall tiles / Siding tiles / Floor tiles to supply free hot water from solar energy or to be used as a Floor heating or refrigeration product.

With a manufacturing cost of max $ 1.- per square ft using our faster production technology it is the one product with the most potential.

We are looking for the development / production and marketing of one or several of these products for their many applications und a licensing arrangement or a partnership where we will also invest funds - with people with a good marketing background - as our 40 years of experience and know how is in a much faster production technology - adding more value to existing products - and the reduction of raw material costs - Partners with marketing and know how in the building trade will compliment our expertise .

Only when Standard Building Products such as Roof Tiles / Siding Tiles / Wall tiles / Floor Tiles supply hot water from solar energy are made available for a very low cost will the use of Solar Energy find a widespread use .

We have the product - We also have the production technology that allows low cost manufacturing . We are looking for a Technology transfer - or a Partnership in which we also invest funds to develop make and market these products world wide . Here is more information :


THERMOTILE - THE MAX POTENTIAL SOLAR ENERGY PRODUCT.
Supplies hot water from ROOFS / SIDINGS / FLOORS / DECKS / DRIVEWAYS / PARKING LOTS .

Also :

FASTER PRODUCTION TECHNOLOGY FOR MAKING RUBBER PRODUCTS FROM RECYCLED TIRES / PLASTICS / BLENDS + OUR FORMULA :


THERMO TILE is a modular element tile with multiple conducts for many different applications and Markets : SOLAR ENERGY RECOVERY - REFRIGERATION - ELECTRICAL CONDUITS - BUILDING PRODUCTS - AERATION AGRICULTURAL USE etc.

Can be produced and made to look like a :

INDOOR FLOOR HEATING TILE where it will heat the floor and provide energy savings and a more comfortable home .

OUTDOOR FLOOR TILE it will supply hot water from the Energy of the sun for your Pool your Bath your laundry your dishwasher while making the parking lot / entrances / pools look a a lot nicer .

ENTRANCE TILE OR FLOOR RUNNER it will be a SAFETY ANTI SLIP AND DRAINAGE TILE WHEN WET and a SNOW & ICE MELTING SAFETY TILE IN WINTER.

SIDING TILE it will provide energy from the sun in form of hot water for your Pool your Bath your Dishwasher your laundry etc. while having a multitude of attractive appearances and protecting to your house at the same time .

ROOFING TILE it will provide energy from the sun in form of hot water while being a quality Roof Tile with the appearance of a natural Slate Roof - Wood Shingle Roof or the appearance of any other type of conventional roof tile.

ICE SKATING ARENA TILE it will supply a Ice Surface for a Skating Rink that can be installed permanently or temporary .

FLOOR OR WALL TILE in a Walk in Cooler or a Refrigerated Van it will provide Refrigeration for many applications

UNDERGROUND CABLE CONDUIT with supporting and Interlocking Features .

TUBES - PIPES The patented process to make THERMOTILE also makes Large diameter Tubes - Pipes - with Fittings as a integral part . Ideal for Underground Pipe Lines for Water - Oil - Gas transport or for Underground Electric and Telephone Cable Conduits - with a cost reduction of 80 % and a superior Quality .

WHAT CHANGES IN THE DIFFERENT APPLICATIONS IS THE THICKNESS OF THE TILE -

As a ROOFING TILE or SIDING TILE a relative thin product is acceptable . As a FLOORING TILE in
a Parking lot a Thicker - more LOAD BEARING TILE is required so that CARS AND TRUCKS can
park on them .

WHAT CHANGES ALSO FOR ITS MANY DIFFERENT APPLICATIONS IS THE LOOKS - SIZE AND SHAPE OF THE TILE -

A Roofing tile for the JAPANESE MARKET will have to look different than one for the American or EUROPEAN MARKETS.

BEST FEATURE OF THEM ALL IS THE VERY LOW PRODUCTION COST for all these applications which is in the $ 0.50 TO $ 1.00 PER SQUARE FT RANGE - Way below the production cost of all other Solar Energy products on the market today making the product affordable for everyone.

This low Production Cost for THERMOTILE PRODUCTS is made possible with our much faster Production Technology that makes 4 to 8 square ft per minute and the use of quality recycled materials such as PVC from Electrical Cables and Rubber from Tires or recycled polymer blends that costs much less than new materials .

FASTER PRODUCTION TECHNOLOGY FOR RUBBER / PLASTIC PRODUCTS

Are there molded Rubber Products such as a Rubber Wheels / Casters / Traffic Cones / Floor Runners / Solid Tire - Mud Flaps - Road Safety Products - Stair Treads - Interlocking Floor Tiles - Entrance Mat Hockey Pucks - etc that you can sell by the truckload if only your cost would be much lower ?

New Technology reduces the usual 15 minute production time of vulcanized Rubber products. to less just seconds . The same technology can be applied to Thick Thermoplastic Materials with long Cooling cycles.

At a hourly rate of $ 40.00 for machine time and a production output of only 4 units per hour using current production methods - your unit cost is $ 10.00 each Machine time . With our new Production Technology you will produce 60 or more units per hour on the same molding press. - Your cost is reduced to only $ 0.66 . You make an extra profit of $ 9.00 on each unit ! More savings when products
are made in 10 seconds .

If at the same time you use recycled materials ( Rubber Crumb available at 7 to 10 cents / lbs ) or recycled PVC or Elastomer Blends - you also reduce substantially your Raw Material Cost .

A combination of both - a much faster production method and a much lower raw material cost will give you a winning combination that allows you get the orders away from other long established competitors -
If at the same time you come up with additional Value added Features for the existing or new product you will get the Lion Share of the market for your products !

We can licence you this faster production Technology or as we have Funds available we can invest with you in a Joint Venture / Partnership to produce quality products from Scrap Tire crumbs

The Choice is yours as we can work with you as a Consultant in a Licensing Arrangement based on 25 % of the savings you will have using our Technology or as a Partner where we would also invest Funds in Molds - Plant and Machinery in return for earnings .

We have 40 years of experience and " Know How " in turning Scrap into Quality Products . More detailed Information and Newspaper write ups on the many Award Winning products we made and sold World Wide using scrap material no one wants and faster Production Technology is available to you on request

We are looking for a Technology Transfer - Joint Venture - Partnership etc in which we supply
Know How Patents and Investment Funds in return for part of the Earnings .
.

OUR FORMULA TO MAKE MONEY WITH RECYCLED TIRES / PLASTICS


1 - MAKE EXISTING PRODUCTS - With more value added features .
( You will get orders immediately )

2 - MAKE THESE PRODUCTS MUCH FASTER - ( We have the technology to make rubber products
In seconds instead the usual 15 minutes so that you save on production cost ) - The savings are
Outstanding - with the average hourly operating cost of a molding press of $ 40.- and making
only 4 parts per hour on a single cavity mold your cost is $ 10.- per part - with our technology you
make a part every 10 seconds or 360 parts per hour - and your cost is down to only 11 cents each
Much less if you use multi cavity molds .

3 - MAKE THESE PRODUCTS WITH MUCH LESS COSTLY RAW MATERIALS ( We have 40 years
of experience and know how in using recycled rubber / plastics / blends to make award winning products
That sold world wide ) The savings on raw material cost are 90 % - new rubber compounds or plastics
Sell for over one dollar per lbs - recycled rubber / plastics / blends in the 10 cents // lbs range - so
you have outstanding saving on your raw material cost .

4 - DO YOUR MARKET RESEARCH ( know your clients - your competition - your market volume -
find what value added features can be incorporated in existing products ) you will avoid costly mistakes

5 - GET UP FRONT ORDERS AND COMMITMENTS ( That way you know exactly when your investment
dollar comes back into your own pocket )

6 - HAVE INVESTMENT FUNDS AVAILABLE FOR MOLDS AND MACHINERY ( So you can get started
whenever you are ready )


We work with our Friends and Clients as a consultant for a percentage of the savings they have using our technology and 40 years of know how in making award winning products from recycled rubber / plastics
and blends .

Or in a Partnership where we also invest our own funds in return for earnings .

Or supply a volume selling product for much less that others can make the product in a exclusive or non
exclusive arrangement .

Want more information on our successes ? - Our experiences ? - Newspaper write ups ?

We are looking for a Licensing arrangement - or a Partnership where we would also invest funds to develop / produce / market one or several of these products world wide . The ideal Partner would be one with your experience in the Building and Construction Field and one that has the know how in marketing these products so that we can compliment each other .

Answers to important questions concerning THERMOTILE !

HOW TO PREVENT LEAKAGE IN THERMOTILE INSTALLATIONS ?

A- Use of O' rings when removal - or expansion / retraction is required .
B- Use of self curing bonding O rings inside connections when a permanent bond is required.
C- Use of Suction instead of pressure - this way even a installation full of holes will not leak !

Martin Scholler
ATLAS POLYTECH INC . 400 MARIE VICTORIN BOUCHERVILLE QUE. CANADA J4B - 1W2
TEL 450 449 4041 FAX 450 449 7454 e-mail : scholler@videotron.ca

Pictures and drawings are available

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:





About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2017 Renovate Your World LLC