> Ask a Question > Fix It Forum > Portable stage:
Login | Register

Portable stage:

Posted by John 2000 on September 30th, 1999 03:49 PM
In reply to Plans for constructing a small portable stage by Hannah on September 30th, 1999 12:37 AM [Go to top of thread]

0 of 1 people found this post helpful

Hi" Hannah,
How big do you want the stage to be.??
The idea I have in mind will let you build one as
big as you want,.
You can a box (sample size) 2' wide by 4'long
and the hight "2'" ??.
So lats make one for you to look at.
First. Plywood 3/4" or 1" thick , cut to size 2'x4'
this will be the floor,
Now sides cut some 1/2" plyood size, 3'11" x 1'11".
Now the ends, cut 1/2" plywood size 1'11" x 1'11"
Now timber, plained (smooth) 2"x 2" make a frame size
3'7" (you want two) and also two 1'x 7".
Now screw the frame to the 3/4"-1" plywood, leaving the
same space around the edges, (the frame is smaller than the
plywood,screw the side panels (thats the 1/2" plywood to the 2x2 frame)
and now you have a box. that should be 2"x 4'x 2' but with a hole
in the bottom, make another frame the same size in timber using 2x2 and
screw this on the inside 3/4" from the bottom.
and now screw all the sides togther cut four holes so you can get your hand
in, two on one side and two on the other. this is so two old ladies
can carry it.
Now you have a sample to look at, and if you like it, then away you go....
Have fun..
John 2000

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2017 Renovate Your World LLC