> Ask a Question > Fix It Forum > Make one if you will
Login | Register

Make one if you will

Posted by Moderator, Steve on December 8th, 2002 01:02 PM
In reply to Hanging Mirrors by Gary Morin on December 8th, 2002 10:49 AM [Go to top of thread]

Personally, things like this have to be adjusted for a proper hang and to be even.

I really like just screwing a good screw into both sides of the mirror equally down and equally in. Then run a semi tight wire from each screw and secure it with 5 or so loops around the wire and tie it off.

Now you have a wire that is below the top of the mirror and slack enough for adjustments here and there.

Its done, those saw tooth mirror hangers only give you several adjustments and that might not be enough. And sometimes you cannot mount them because there is not any wood where they must be fastened.

Just an idea for you.

Was this post helpful? Yes: or No:

Topic History:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2016 Renovate Your World LLC