I have replaced the vent from the dryer to the outside vent. I repalced it with flexable aluminum hose. I had a repair man out to check the dyer to check out the dyer. He said there was nothing wrong with it. But told me that the flexable aluminum hose vent should be relaced with mental piping. the length from the dryer to the vent outside is at least 14ft. the hose in back of the dryer is plastic taped to the flexable then it goes through the basement to the out side vent.
If i neeed to replace this the area that the plastic is a very tight area in which I would have to increase the size of the whole. What type of saw could I use in this small area. thanks