 |
I had my 95 year old double hung windows replaced this last summer.
Posted by Bruno1949  on March 1st, 2011 11:19 AM
In reply to New windows for my house - recommendations by trailsguy on February 25th, 2011 09:32 AM [Go to top of thread]
The windows were double pane High E glass from Park Avenue and I love the windows BUT on windy days, 40 mph plus, I still feel air leaking around the trim. The problem with replacing just the sashes without disturbing the trim inside and out is that you can't get a windproof seal. I'm going to start pulling the Oak trim stops and using insulation and foam to seal the gaps that I know exist behind them. I don't blame the installers or the windows. It's just impossible to fill all the little gaps if you don't have access to them and that requires taking off trim on one side or the other.
My windows were anything but standard sizes, tall and narrow Arts & Crafts style, but yours are probably a standard size. As suggested, it might be cheaper and better to replace the entire window and frame so you can seal it up properly. Once you figure out the easiest way to pull the trim without damage you might have to spend an extra hour or two on each window but it's time well spent.
I noticed an immediate difference in street noise and better climate control so just new inserts sure help, but the breezes still come through a little. Spend the time to do it right. In the end you will be much happier.
Almost any maker has a line of do-it-yourself windows that can be installed as a unit. Anderson, Marvin, and Pella are just a few. Just shop around and pick the best you can afford. Caulk and seal all the gaps on all four sides and things should be fine. Was this post helpful? Yes: or No: |
 |
Post Reply
Watch this Post
