> Ask a Question > Fix It Forum > Help.??
Login | Register


Posted by John 2000 on February 7th, 2001 04:06 PM
In reply to need to bend wood - help! by Howard Brooks on February 7th, 2001 03:32 PM [Go to top of thread]

Hi", Howard, lots of hot water, and slowly bend it into shape
by using a jig...or you can use plywood built up in layers
of 1/4" thick, staple the ply to the shape you require, the
waterproof glue,and do the same again building up on the
layers till you have the right thickness, the glue will
hold the plywood to the shape, and you can nip the staples
off. I normaly tape the last layer to the shape, if its a
hard wood finish.. just for fun, make yourself a coffee
table,about 18"across, using the same system as I've said
this way you will learn how it will go together.
normaly you get a 8 x 4 panel. with the grain going the
8'run, try to get a panel that has the grain going the 4'
way,( its easy to bend.)....John 2000

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2017 Renovate Your World LLC