Moderator Post (s) for this thread: >Control freakedbyHKestenholz on 01/21/2010
I have a venter blower motor that is worn and when it stops it will not restart unless you give it a push manually. Apparently its is a high failure item as I have seen posts here describing the need for lubrication and such after 3 or 4 years.
As long as it runs its ok, but when it stops due to correct temperatrue, it will not restart without a push... but once running its ok..
Here is my question: If I hard wire the venter blower to run 24x7, will it be bypassing any safety devices. I would only run it this way until I can get a new motor,