> Ask a Question > Fix It Forum > Finishing a cedar door- Help!
Login | Register

Finishing a cedar door- Help!

Posted by Kathy on October 25th, 2002 05:15 AM

I am refinishing my 15yr old cedar garage door with the Sikkens Cetol1/23 products. I removed the old finish by sanding and by using a gel remover(neutralized with methyl alcohol when done). Because the outside temp is quite low I put up a plastic tarp outside the door. I applied the first coat of Cetol1 and it has dried with a whiteish haze. Am wondering what went wrong. The outside temp was 45F but inside the plastic the temp was 60-63F (Sikkens recommends a min. temp. of 50F). Am wondering if the humidity was maybe too high. Don't know what the humidity level should be. I would greatly appreciate any suggestions. I need to get this done before our Northeastern winter arrives!! Thanks

Was this post helpful? Yes: or No:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2017 Renovate Your World LLC