Cyndy's Geodesic

Post Reply | Watch this Post

Cyndy,I think the solution to your problem, since you're living in the home, would be to cut new panels from 1/8" pine plywood. All the geodesics I saw up in your neck of the woods were generally plywood (sure it's pine?... probably fir from down in Weed). You can cut the triangles and seal them with natural Watco danish oil and glue them on to the existing with panel adhesive or water-based contact cement. Kind of like wallpapering over, which would sure seem to beat stripping, washing, bleaching or etc. Staining from biologics can be removed to an extent by scraping with a cabinet scraper, but if you do have plywood, you'll go thru the veneer before you get the stain out. A cabinet scraper would be good for cleaning up the frames. Luck, Kizmet