7 of 8 people found this post helpful
Thanks for all the responses including those thatwere sent offline.
Here is how I ended up cutting the formica for myfoosball table.
We cut the 4x8 sheet of formica by scoring it with a sharp knife and then snapping it apart.
The roughly sized pieces of formica were then adhesive bonded to the final surface.
A sharp file was used to shape it to the final dimensions needed.
The large holes were cut with a power drill.
The large rectangular apertures with rounded corners were cut using a dremel motor and router bit.
Thanks again to all who helped.
© 2017 Renovate Your World LLC