> Ask a Question > Fix It Forum > CAST IRON PRODUCTS
Login | Register


Posted by DAVID CHANGHONG XUE on October 20th, 2002 08:00 PM
In reply to Look for "black rust" by Dodgeman on May 17th, 2000 01:02 PM [Go to top of thread]

Dear Sirs:
It is my pleasure to visit your web site. as we are the exporter of various OEM cast iron/ steel products. We take the liberty of writing you to brief our company. we are a sate-owned foreign trade company specialized in exporting of Various container ship, Oil Tanks, cast steel board castings, and various castings made according to our importers drawings, samples, or patterns:
Grey cast Iron(ASTM No.20/25/30/35): Electric Motor: casings, end Covers; Pump parts like impellers ,casings, motor frame. Bends, stands, bearing covers, bracket. Valve parts: Such as valve body, Disc, bonnets, hand-wheel, Transmission support.

Centrifugal Cast Iron Non-hub Pipes ASTM888 DIN19522 BS416 Size from 1.5"~12" Our this product have be approved by DNV of Norway and Pass the UPC certification of USA.

Cast iron underground pipe fittings. Various cast iron flanges, Lamp base, Ornamental cast iron fence accessory such as :Finials, Spears, Ball Caps, Picket, Collars. Rosettes, Decorative Inserts, Railing Panels, Corner Pieces, Frieze , Balusters, Post, etc. Flower Pots,

Counter weight iron ( balancer ) of crane truck and fork lift truck etc, gas burners, fire place parts, cooking wares.

Ductile Cast iron(ASTM: 60-42-10/70-80-65 JIS FCD400/450/500): Pump parts, Impeller, various Valve body, caps, Flange, Pipe clamps, Fire Hydrant, Pipe Fittings: Double Socket , Bends, All Socket Tees, Double Socket Tee with Flanged Branch, Double Socket Tapers, Double Flanged Tapers, Collars, Flanged Sockets , Flanged Bell-mouth, Flanged Spigots, Tees, All Flanged Radial Tees, All flange Y pipe, All Flange Crosses, Bends having Cleaning Hole and Cover, Double Flanged Hatch-box, all these according to ISO2531/EN545. Double Flanged base bends, All flanged base tees, Double Flanged Reducer, All flange Tees, All Flanged Crosses, etc according to ANSI/AWWA Size From DN80~DN1200mm(3~60Inch) ,Our Fittings are Outside Bitumen –Coated, inside lined with Portland Cement or as per your request.

Ductile centrifugal cast iron pipes size from 100mm ~1200mm.

Blackheart Malleable cast iron (JIS: FCMB28/32/35/37. BS. B290/6, B310/10, 340/12. ASTM 32510/35018, DIN GTS-35-10)Like, Elbow, coupling, Reducer, Cross, Tee, bend, end cap, plug, backnut, nipples, unions etc.

Cast malleable iron formwork tie wing nut, coupler, form clamp, D15 Double wing nut, D15 Hex Joint Nut , D15 Round faced wing nut, Swivel Clamp, water stop center, connection sleeve, Washer, Cone Nut, Hex. & round Nut, Rapid Clamps, Jack Handle, Jack Nut, Support Nut, steel formwork tie rod (wire) D15/17 length 0.85m,1m, 1.2m, 1.5m,1.7m,2m,2.5m,3m,3.5m,6m and others scaffolding accessory, decorative cast iron spears, etc.

power transfer hardware like Insulator caps, etc.
Cast steel products: Marine component: (ASTM 450-240, 485-275, BS. A1, A2, DIN GS-42/45, JIS. SC450/480)as: Bitts, Bollards, Cleats, Anchors, Anchor Chain Guides, Winch Components, Couplings, Wire Rope/ Cable Sheaves, Wire Rope Thimbles, Hooks( Grapple, Release, Towing), Towing Plates, and other Deck Castings. Stainless steel pump casings, rings, impellers, diffusers, valve body, caps,
Cast steel rollers, slag pot, chock, ingot mold .
Manhole cover and frame. Sewer , drain system, Gully Grates. Material Grey cast iron. Ductile cast iron. cast P.P Reinforced glassfibres we factory have automatic molder machine line. products made according to the BS EN124, Class A15, B125, C250 AND D400. We have pass the ISO9002 certification. all our product are black Bitumen coatet, we also have gully grate, tree grate, step Iron , catch Basin,. etc
Stainless steel investment casting:( ASTM CF-8, CF-3M, CF-8M, CA6NM, JIS SCS13, SCS16A, CS14A, SCS6 etc) Valve body, cap, hand-wheel, disc. Pumps, casings, Impellers, rings, interstage rings, diffusers,
COOKING WARES: Pan Handle, Golf Heads, pipe fittings, like elbow, bends, couplings, socket banded, nipples, bushings, caps, crosses, spuds, tees,
We can cast and machine according to our importers drawings, samples or patterns. take green sand mold casting, Resin bonded sand mold casting, furan-resin mold casting, loss wax casting etc. which can fully meet your various need. we have eight different Sub-foundries which can supply us with the different kind of castings. We can take paint finishing or powder coated finishing for the casting upon your request.
Seamless pipe, welded pipes, butt fittings.
We also export OEM Welded steel machiner and forklift structure part welded and machine according to our importers drawings.
we welcome you visit our company ,our foundries , to see our products in person. We can offer you upon receipt of your E-mailed AUTO CAD Drawing. Or original drawing.
China National Machinery & Equipment Imp & Exp. Corp. Dalian Co. Ltd.

Sincerely Yours
DAVID. CHANG HONG. XUE /No.3 Export. Dpt. Manager

Was this post helpful? Yes: or No:

Topic History:

Topic Follow-ups:

About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2017 Renovate Your World LLC