 |
biltbest windows
Posted by reuster2 on December 6th, 2010 12:35 PM
I got about half the seals I needed to replace them in my windows and couldn't get in contact with biltbest for the rest. The bigger problem is I need to replace most of the windows because the bottom of the alumnim clad windows are rotted out. We built the house in 84 and used 1" foam on the walls, the outside is brick. The question is, can I use the original window and just replace the frame? I see where a lot of people have leaking windows that were installed improperly. My next question is do I have to remove brick to facilitate a proper installation?
norman Was this post helpful? Yes: or No: |
 |
Post Reply
Watch this Post
