This topic contains 1 reply, has 0 voices, and was last updated by  Jay J 2019 years, 9 months ago.

  • Author
    Posts
  • #15703

    Dan

    We are doing some construction on our house. One thing we are doing is adding an office. Currently there is a pair of 36″ doors in the opening going outside. We would like to install some french pocket doors instead. The walls are 4×6 constuction. They are load bearing and have a 4×12 header. What I need to know is where can I get the needed doors & hardware etc. I live near Los Angeles. Thank you.

    Dan

  • #86208

    Jay J

    Dan,

    I got our pocket doors through True Value. They were Stanley. Give it a shot. DO tell them your ‘setup’ before you order. In fact, you can visit The Stanley Works, and see if they can answer an e-mail for you. Hopefully, they still make pocket doors. ANd, do ask them where you can order them in the LA area.

    My best to ya and hope this helps.

    Jay J

You must be logged in to reply to this topic.