Part Retriever

When you are working in an area where a washer or nut can drop into a delicate assembly or be difficult to retrieve, use dental floss. Fasten one end of a long piece of floss to the part and the other end to something solid. When the parts are finally installed, the dental floss can either be cut off or, as in the case of a nut, it will come right off because it will be cut by the threading action.
Read More

Septic Tank Care

Have your tank inspected by a septic tank professional every three to five years - more frequently if your family uses a lot of water and/or a garbage disposer. You can reduce the strain on your septic system by using less water and staggering showers, clothes washing, bathing and other heavy usage.
Read More

Water Quality Report

The majority of consumers rely on local utilities to produce a safe and ample supply of water. Your local water agency is responsible for sending you an annual Consumer Confidence Report that should list the source of your water, what contaminants may be in the water, and information on the safety levels of contaminants and their effects on health.
Read More

Flood Prep – Sewer

Keep these points in mind if you have backflow valves installed:

a) Changes to the plumbing in your house must be done by a licensed plumber or contractor, who will ensure that the work is done correctly and according to all applicable codes. This is important for your safety.

b) Some valves incorporate the advantages of both flap and gate valves into a single design. Your plumber or contractor can advise you on the relative advantages and disadvantages of the various types of backflow valves.

c) Valves should be installed on all pipes that leave the house or that are connected to equipment that is below the potential flood level. So valves may be needed on washing machine drain lines, laundry sinks, fuel oil lines, rain downspouts, and sump pumps, as well as sewer/septic connections.

d) If you have a sump pump, it may be connected to underground drain lines, which may be difficult to seal off.
Read More

Flood Prep Plumbing

Check Drain Plug: Install a floating floor drain plug at the current drain location. If the floor drain pipe backs up, the float will rise and plug the drain.

Install a Sewer Backflow Valve: If flood waters enter the sewer system, sewage can back up and enter your home. To prevent this, have a qualified, licensed plumber install an interior or exterior backflow valve. Check with your building department for permit requirements. If you are retrofitting a backflow value, check with your building department for permit requirements. Be sure to talk to a professional home builder, architect, contractor or building supply retailer for other backflow mitigation tips.
Read More
  • 1
  • 2