Wall Bumps

If you find bubbles or specks of some kind under new wallpaper, first cut an X pattern over the defect. If the problem is a speck, remove it with a tweezers or a utility knife. Then work seam adhesive into the cavity, squeeze out the excess, and seal the opening. For air bubbles you also can use a paste-injecting syringe found in paint and wallpaper departments.
Read More

Wallpaper Prep

Here are few things to keep in mind when applying wallpaper: New Walls - Must be thoroughly cured, dry, primed and sized. Previously painted walls - Fill cracks or holes with patching paste, then sand smooth. Spot-prime the patches and size all walls to be papered. Walls with old wallcovering - Remove, patch, sand and clean. Be sure the old adhesive is gone and the walls are completely dry before sizing.
Read More

Wallpaper Start

When applying wallpaper, choose an inconspicuous spot for your starting point. The edge of a door frame is a good choice. This is where the first and last strips of wallcovering in the room will meet, and inevitably, those strips won’t match perfectly. That’s why it’s important to find an inconspicuous spot.
Read More
  • 1
  • 2