Home > How To Library > Step-by-Step How-Tos Videos > Safety > How to Secure Furniture to the Wall

How to Secure Furniture to the Wall

Print VersionBookmarkEmail this page to a friend.

DIFFICULTY RATING: (1 out of 5 - Beginner)

Use safety brackets to secure heavy furniture to the wall and prevent accidental injury to children.
Drill (Buy) Furniture safety brackets (Buy)
Stud finder (Buy) Wire clippers (Buy)

Before you drill, make sure there are no electrical wires or plumbing behind the wall. Follow safety precautions by wearing safety goggles and a dust mask when disturbing walls. This information is offered only as a guideline. Always follow the instructions that came with your safety brackets.


Click to enlarge +
Step 1: How Safety Brackets Work
Most safety brackets have three parts. One part attaches to the wall, one that attaches to the furniture, and a third piece to hold the brackets together.

Safety brackets have three parts.


Click to enlarge +
Step 2: Mark a Spot for the Safety Bracket
Mark the position of the furniture on the wall and look for the nearest stud. Safety brackets should only be screwed into the wooden wall studs behind the wallboard.

Determine where the bracket should go on the wall.


Click to enlarge +
Step 3: Find a wall stud before you attach the bracket.
You can find wall studs by using a stud finder or by locating the nail depressions in baseboards or ceiling moldings where they have been tacked to the stud. Studs are typically spaced every 16 inches.

A stud finder will light up as it passes over a concealed stud.


Click to enlarge +
Step 4: Mark before drilling
Mark the spot on the wall that is in line with the stud and at the right height for the furniture.

Mark the wall at the stud before you drill.


Click to enlarge +
Step 5: Drilling pilot holes
Select a drill bit that is slightly smaller than the screw for the bracket and drill pilot holes to follow when attaching the bracket.

Drill pilot holes before you attach the screws.


Click to enlarge +
Step 6: Attach the wall bracket
Use an electric screwdriver to drive the screws through the bracket and attach it to the wall.

Use screws to attach the bracket to the wall.


Click to enlarge +
Step 7: Attach bracket to furniture
Decide where you want the furniture to meet the wall and align the second bracket to meet the first. Attach the second bracket to the piece of furniture using the screws provided. Align the two brackets and lace the detachable security strap through the brackets.

Attach the second bracket to the furniture and lace the security strap through each piece.


Click to enlarge +
Step 8: Secure the furniture and trim the strap
Feed the safety strap through each of the brackets and pull it tight to secure the piece of furniture to the wall. Trim the excess strap with wire cutters.

Pull strap and trim with wire cutters.


Watch the Video of this
Step by Step.

Watch Video


Text by Deb Alden
Renovate Your World




Need a contractor for your project?





About  | FAQ  | Contact  | Sitemap  | Privacy Policy  | Terms of Use  | Help

© 2014 Renovate Your World LLC