In gas appliances, look for blue flames; yellow flames indicate the gas is burning inefficiently and an adjustment may be needed.
During construction, soil will often be without grass, trees, shrubs, and other plants. Without this protective vegetation, storms can move the soil into your neighbor's yard, clog storm drains and streams, and carry pesticides and nutrients into the water. To prevent erosion, cover these bare areas with mulch, such as straw, grass clippings, stones, wood chips, and other protective cover. On steeper slopes, you should cover the mulch with burlap netting for extra protection. Vegetated and mulched areas increase water filtration into the soil, reducing erosive runoff water.
Cross cuts are cuts the go against the woodgrain. Once you've properly measured and marked your piece of wood, guide the side of the handsaw blade with the knuckle of your thumb. Start the cut by pulling your hand saw up two or three times, then push the saw blade forward at about a 45 degree angle. It is preferable to begin your cuts on the side of the wood that will show less when the project is complete.